Can a few base maps be ungrayed so you can turn them off when doing verification?

Forums

RSS (Opens New Window)

James Brusda, modified 1 Year ago.

Can a few base maps be ungrayed so you can turn them off when doing verification?

Youngling Posts: 8 Join Date: 7/16/15 Recent Posts

Hi, In IRIS, when you want to do verification you can't ungray a few items

1. Select the Verification tab at the bottom

2. Select Map Data

3. The following 3 items are grayed out, and you can't turn them off:

MRMS Base Reflectivity

MRMS Composite Reflectivity

MRMS Echo Tops

So the reflectivity image always shows when I am doing verification, especially in real time.

Is there anyway from those items to be ungrayed so you can turn them off if you like?

I try to send an image too.

Thanks,

Jim

Mike Sutton, modified 1 Year ago.

RE: Can a few base maps be ungrayed so you can turn them off when doing verification?

Youngling Posts: 61 Join Date: 6/21/13 Recent Posts

Jim,

There is a ticket open for that issue. No estimate on when it will be addressed.

Thanks,

On Thu, Feb 15, 2024 at 12:37 PM James Brusda <VLab.Notifications@noaa.gov> wrote:

Hi, In IRIS, when you want to do verification you can't ungray a few items

1. Select the Verification tab at the bottom

2. Select Map Data

3. The following 3 items are grayed out, and you can't turn them off:

MRMS Base Reflectivity

MRMS Composite Reflectivity

MRMS Echo Tops

So the reflectivity image always shows when I am doing verification, especially in real time.

Is there anyway from those items to be ungrayed so you can turn them off if you like?

I try to send an image too.

Thanks,

Jim

--
James Brusda IRIS Virtual Lab Forum https://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35288505 VLab.Notifications@noaa.gov

Mike Sutton - KB5ZRC
Information Technology Officer

Weather Forecast Office

4899 Tim Dougherty Drive SE

Grand Rapids, MI 49512-4034

Google Voice: (616) 379-9216

Office: (616) 949-0643 x486

AWIPS2 - Build 23.2.1-38

Phil Kurimski, modified 1 Year ago.

RE: Can a few base maps be ungrayed so you can turn them off when doing verification?

Youngling Posts: 10 Join Date: 12/29/13 Recent Posts

Jim,

I toggle off the MRMS Base Reflectivity by clicking on the yellow product legend on the right hand side of the window. So you go from this:

To this:

Notice the product is now greyed out and no longer shows up on the map.

Phil

On 2/15/2024 11:37 AM, James Brusda wrote:

Hi, In IRIS, when you want to do verification you can't ungray a few items

1. Select the Verification tab at the bottom

2. Select Map Data

3. The following 3 items are grayed out, and you can't turn them off:

MRMS Base Reflectivity

MRMS Composite Reflectivity

MRMS Echo Tops

So the reflectivity image always shows when I am doing verification, especially in real time.

Is there anyway from those items to be ungrayed so you can turn them off if you like?

I try to send an image too.

Thanks,

Jim

--
James Brusda IRIS Virtual Lab Forum https://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35288505 VLab.Notifications@noaa.gov

-- 
Phillip Kurimski, CAPM
Senior Meteorologist
National Weather Service
WFO Green Bay, WI

James Brusda, modified 1 Year ago.

RE: Can a few base maps be ungrayed so you can turn them off when doing verification?

Youngling Posts: 8 Join Date: 7/16/15 Recent Posts

Hi Phil,

Thanks for the tip.

Here is what is interesting.

I don't have an option to turn off MRMS when I am on the verification tab. However, when I am on the cities Tab I do have that option.

So, I can just turn off the MRMS in the cities tab first, then go over to the verification tab and do my verification.

I am sending 2 screenshots, one of the cities tab and one of the verification tab.

Thanks for the help.

Jim

On Fri, Feb 16, 2024 at 11:06 AM Phil Kurimski <VLab.Notifications@noaa.gov> wrote:

Jim,

I toggle off the MRMS Base Reflectivity by clicking on the yellow product legend on the right hand side of the window. So you go from this:

To this:

Notice the product is now greyed out and no longer shows up on the map.

Phil

On 2/15/2024 11:37 AM, James Brusda wrote:

Hi, In IRIS, when you want to do verification you can't ungray a few items

1. Select the Verification tab at the bottom

2. Select Map Data

3. The following 3 items are grayed out, and you can't turn them off:

MRMS Base Reflectivity

MRMS Composite Reflectivity

MRMS Echo Tops

So the reflectivity image always shows when I am doing verification, especially in real time.

Is there anyway from those items to be ungrayed so you can turn them off if you like?

I try to send an image too.

Thanks,

Jim

--
James Brusda IRIS Virtual Lab Forum https://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35288505 VLab.Notifications@noaa.gov
-- 
Phillip Kurimski, CAPM
Senior Meteorologist
National Weather Service
WFO Green Bay, WI
--
Phil Kurimski IRIS Virtual Lab Forum http://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35315769VLab.Notifications@noaa.gov

Phil Kurimski, modified 1 Year ago.

RE: Can a few base maps be ungrayed so you can turn them off when doing verification?

Youngling Posts: 10 Join Date: 12/29/13 Recent Posts

Jim,

That is interesting! I admit I do not use the verification aspect of IRIS that much. My go to is the DLH Severe Verification Helper:

Severe Verification (google.com)

Phil

On 2/20/2024 6:13 PM, James Brusda wrote:

Hi Phil,

Thanks for the tip.

Here is what is interesting.

I don't have an option to turn off MRMS when I am on the verification tab. However, when I am on the cities Tab I do have that option.

So, I can just turn off the MRMS in the cities tab first, then go over to the verification tab and do my verification.

I am sending 2 screenshots, one of the cities tab and one of the verification tab.

Thanks for the help.

Jim
On Fri, Feb 16, 2024 at 11:06 AM Phil Kurimski <VLab.Notifications@noaa.gov> wrote:
Jim,

I toggle off the MRMS Base Reflectivity by clicking on the yellow product legend on the right hand side of the window. So you go from this:

To this:

Notice the product is now greyed out and no longer shows up on the map.

Phil

On 2/15/2024 11:37 AM, James Brusda wrote:

Hi, In IRIS, when you want to do verification you can't ungray a few items

1. Select the Verification tab at the bottom

2. Select Map Data

3. The following 3 items are grayed out, and you can't turn them off:

MRMS Base Reflectivity

MRMS Composite Reflectivity

MRMS Echo Tops

So the reflectivity image always shows when I am doing verification, especially in real time.

Is there anyway from those items to be ungrayed so you can turn them off if you like?

I try to send an image too.

Thanks,

Jim

--
James Brusda IRIS Virtual Lab Forum https://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35288505 VLab.Notifications@noaa.gov
-- 
Phillip Kurimski, CAPM
Senior Meteorologist
National Weather Service
WFO Green Bay, WI
--
Phil Kurimski IRIS Virtual Lab Forum http://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35315769VLab.Notifications@noaa.gov
--
James Brusda IRIS Virtual Lab Forum http://vlab.noaa.gov/web/iris/iris-forum/-/message_boards/view_message/35391407VLab.Notifications@noaa.gov

-- 
Phillip Kurimski, CAPM
Senior Meteorologist
National Weather Service
WFO Green Bay, WI

Can a few base maps be ungrayed so you can turn them off when doing verification? - IRIS Forum - IRIS

Forums